Measurement
Response Time | Units | Operational Range | Resolution | Accuracy (+/-) | Specification Range |
Wind Speed
1 second | m/s | 0.4 to 60.0 m/s | 0.1 | Larger of 3% of reading or least significant digit | 0.4 to 40.0 m/s |
| ft/min | 59 to 11,948 ft/min | 1 | 59 to 7877 ft/min |
| km/h | 1.0 to 218.0 km/h | 0.1 | 1.0 to 144.0 km/h |
| mph | 0.8 to 135.0 mph | 0.1 | 0.8 to 89.0 mph |
| knots | 0.6 to 118.3 kt | 0.1 | 0.6 to 78.0 kt |
| Beaufort | 0 to 12 B | 1 | 0 to 12 B |
1 inch diameter impeller with precision axle and sapphire bearings.
Off-axis accuracy -1% @ 5º off-axis; -2% @ 10º; -3% @ 15º.
Calibration drift < 1% after 100 hours use at 16 MPH / 7 m/s.
Sustained operation above 60 MPH / 27 m/s will wear impeller rapidly
and may cause destruction of impeller. Replacement impeller (NK PN-0801)
may be field-installed without tools (US Patent 5,783,753). |
Temperature
1 second | °F | -49.0 to 257.0 °F | 0.1 | 1.8 °F | -20.0 to 158.0 °F |
| °C | -45.0 to 125.0 °C | 0.1 | 1.0 °C | -29.0 to 70.0 °C |
Measures air, water and snow temperature.
Thermally isolated, hermetically sealed, precision thermistor
mounted externally (US Patent 5,939,645).
Calibration drift negligible. |
Relative Humidity
1 minute | %RH | 0.0 to 100.0 % | 0.1 | 3.0 %RH | 5.0 to 95.0 % non-condensing |
Polymer capacitive humidity sensor mounted in thin-walled
chamber external to case for rapid, accurate response
(US Patent 6,257,074). (To achieve stated relative humidity
accuracy, unit must be permitted to equilibrate to external
temperature when exposed to large, rapid temperature
changes and must be kept out of direct sunlight.) Calibration
drift +/- 2% over 24 months. Relative humidity may be
recalibrated at factory or in field using Kestrel Humidity
Calibration Kit (NK PN-0802). |
Wind Chill
1 second | °F | 0.7 to 135.0 MPH, -49.0 to 257.0 °F | 0.1 | 1.8 °F | 1.8 to 89.0 mph, -50.0 to 50.0 °F |
| °C | 0.4 to 60.0 m/s, -45.0 to 125.0 °C | 0.1 | 1.0 °C | 0.4 to 40 m/s, -45.6 to 10.0 °C |
Calculated from the primary measurements of wind speed
and temperature. Utilizes the NWS Wind Chill Temperature
(WCT) Index, revised 2001, with wind speed adjusted by
a factor of 1.5 to yield equivalent results to wind speed
measured at 10 m above ground. (Specification temperature
limits established by WCT Tables.) |
Heat Index
1 minute | °F | 0.0 to 100.0 %RH, -49.0 to 257.0 °F | 0.1 | 3.6 °F | 70.0 to 130.0 °F, 0 to 100% RH |
| °C | 0.0 to 100.0 %RH, -45.0 to 125.0 °C | 0.1 | 2.0 °C | 21.1 to 54.4 °C, 0 to 100 %RH |
Calculated from the primary measurements of temperature
and relative humidity. Utilizes the NWS Heat Index (HI)
tables. (Specification temperature limits established by
HI tables.) |
Dewpoint
1 minute | °F | 0.0 to 100.0 %RH, -49.0 to 257.0 °F | 0.1 | 3.6 °F | -20.0 to 158.0 °F, 20.0 to 95.0% RH |
| °C | 0.0 to 100.0 %RH, -45.0 to 125.0 °C | 0.1 | 2.0 °C | -29.0 to 70.0 °C, 20.0 to 95.0 %RH |
Calculated from the primary measurements of temperature
and relative humidity. Temperature to which the air would
need to be cooled at a constant pressure to become saturated. |
| Max/Avg Wind Speed | One-button clear and restart of Max Wind Gust and Average
Wind measurement. |
| Display | Reflective 3 1/2 digit LCD. Digit height 0.36 in / 9 mm. |
| Display Update | 1 second. |
| Display Backlight | Aviation green electroluminescent backlight. |
Operational Temperature Range
(LCD and Batteries) | The operational temperature range of the liquid crystal
display and batteries is 14° F to 131° F / -10 °C to 55 °C.
Beyond the limits of the operational temperature range,
the unit must be maintained within range and exposed
for minimum time necessary to take reading. |
| Storage Temperature | -22 °F to 140 °F / -30 °C to 60 °C. |
| Auto Shutdown | After 45 minutes of no key presses. |
| Certifications | CE certified. Individually tested to NIST-traceable standards
(written certificate of tests available at additional charge). |
| Batteries | CR2032, one, included. Average life, 300 hours of use,
+/-depending on backlight use. |
| Environmental | Waterproof (IP67 standard). Drop-tested (MIL.STD.810F;
unit only. Substantial impact may damage replaceable impeller.). |
| Dimensions | Unit 4.8 x 1.7 x 0.7 in / 122 x 42 x 18 mm.
Case 4.8 x 1.9 x 1.1 in / 122 x 48 x 28 mm. |
| Weight | Unit 2.3 oz / 65 g. Case 1.3 oz / 37 g. |
Kestrel Meters are designed and manufactured at NK’s facility in Boothwyn,
Pennsylvania, and are individually calibrated at the time of manufacture.
Every Kestrel Meter comes with a Certificate of Conformity to document
the unit’s accuracy—all Kestrel measurements are traceable to the National
Institute of Standards and Technology, ensuring the highest level of reliability.
Additional NIST Calibration and Certification services are available. |
1300 659 779 
0 item(s) in your Shopping Cart
